Setting up your Microsoft Xbox One console to use My Private Network’s MyTelly service should take just a few minutes by following the steps below. Please note that your Xbox needs to be connected to the Internet and able to browse the web before moving on with the instructions below. You do not need to be connected to our VPN for MyTelly to work, kindly disconnect from the VPN if you have it turned on.

Using a different Xbox? Select your correct generation for the MyTelly setup below:
 
Xbox 360 Smart DNS MyTelly Setup

Whilst the Xbox supports a web browser, we recommend that you use a computer to register your IP Address on our network.

Not yet registered? It’s quick and easy, Sign Up now!

Check MyTelly DNS Settings

 
Login to our website, www.my-private-network.co.uk from your computer browser and you should be redirected to the My Subscription page.
 
Select the MyTelly tab on the left hand corner of the screen and click on Setup.
 
Check MyTelly Settings
 
Take note of the DNS server addresses that appears on your screen, you’ll need it during the setup later.


Register IP Address for MyTelly

 
Scroll down and click on Register This Address. This will register your IP address and also test your DNS setup to indicate whether you have configured the DNS settings correctly.
 
Check MyTelly Settings
 
Please note that in this instance, since you are only changing the DNS settings on your Xbox later and not on your computer, the authentication page will return the following error:
 
Confirm MyTelly Settings
 
Please do not worry about this message as our servers have already registered your IP address as per the image above.
 
To learn more about the MyTelly errors, please refer to our article below:
MyTelly errors – Your DNS setting is not configured correctly.
 
Note: You will not have to do it again unless your IP address changes. Also, any device on the same network will be able to use the MyTelly service as long as you’ve set our DNS on their device’s settings.


Setup MyTelly on your Xbox One

 
From your Xbox One home screen, open the side bar and scroll down until you reach the Settings icon and open All Settings.
 
All Settings
 
Note: If you haven’t connected to your wireless network yet, please click on “Set up wireless network” and ensure you have an active Internet connection before proceeding with the next step.
 
Click on Advanced Settings.
 
Advanced Settings
 
In the next screen, click on DNS Settings.
 
DNS Settings
 
By default, your DNS will be set to Automatic. Change this to Manual.
 
Manual
 
Now, enter the Primary DNS Server and Secondary DNS Server that appeared in Step 1. Take a look at the example images below for reference:
 
DNS Server Addresses
 
DNS Server Addresses
 
Note: The DNS addresses shown in the images here are just examples. Please follow the ones displayed on your own screen as indicated in Step 1.
 
Click Done and you should see the following network summary screen:
 
Done
 
Next, press the B button on your controller to save the settings and it will automatically check the connection.
 
Check Connection
 
If the connection is successful, you will see the following screen to indicate you’re connected to the Internet.
 
Check Connection
 
Once the DNS change has been successful, go back to your Xbox One Dashboard.
 
If your IP address was registered successfully as shown in Step 2 and the DNS has been set up correctly on your Xbox, you should now be able to access the relevant Media Apps on your Xbox.
 
Go ahead and access any TV content providers that we support!


Any Problems?

 
Unfortunately it doesn’t always go to plan!
 
If you have any problems or can’t get MyTelly to work, please email us at support@my-private-network.co.uk. We’ll get back to you as soon as possible and try to help.